NAG Library for SMP & Multicore, Mark 24

FSL6I24DCL - License Managed

Linux 64 (Intel 64 / AMD64), Intel Fortran, Double Precision

Installer's Note


1. Introduction

This Installer's Note is essential reading for whoever is responsible for the installation of this implementation of the NAG Library for SMP & Multicore. It is available together with the Users' Note (un.html) on the distribution medium.

Your attention is drawn to the terms and conditions of the Software License regarding the use of NAG software. Requests for information about the availability of other implementations must be referred to NAG.

2. Implementation Provided

2.1. Applicability

This implementation is a compiled, tested, ready-to-use version of the NAG Library for SMP & Multicore that is considered suitable for operation on the computer systems detailed below:

hardware:          x86_64 systems
operating system:  Linux (glibc-2.9-3.x86_64) and compatible
Fortran compiler:  Intel Fortran Intel 64 Compiler
version and compatible vendor library: Intel MKL version 11.0 Update 3 and compatible

2.2. Derivation

This implementation was produced at NAG Ltd., Oxford on the computing system detailed below:

hardware:          Intel(R) Xeon(R) E5405 2.00GHz
operating system:  Linux with glibc-2.9-3.x86_64
(Fedora release 10 (Cambridge)) Fortran compiler: Intel Fortran Intel 64 Compiler
version 20130313 vendor library: Intel MKL version 11.0 Update 3 compiler options: -msse3 -mp1 -fexceptions -fPIC -auto -implicitnone -openmp
This implementation was also successfully tested using the following:
hardware:          AMD Opteron(tm) Processor 6174 2.20 GHz
operating system:  Linux with glibc-2.11.2-3.3.1.x86_64
(openSUSE 11.3) Fortran compiler: Intel Fortran Intel 64 Compiler
version 20111011 vendor library: Intel MKL version 10.3 Update 7
hardware:          Intel(R) Xeon(R) E5310 1.60GHz
operating system:  Linux with glibc-2.7-2
(Fedora release 8 (Werewolf)) Fortran compiler: Intel Fortran Intel 64 Compiler
version 20120612 vendor library: Intel MKL version 10.3 Update 11
Note: To use the shared NAG library with Intel Fortran 12.x, the location of the directory rtl, which contains the supplied Intel 13.1.1 compiler run-time libraries, must be included in LD_LIBRARY_PATH.

Each routine in the NAG Library for SMP & Multicore, Mark 24, was compiled with the highest level of optimization that enabled the functionality provided by the library to be verified and validated. Most routines in the library were compiled with the optimization flag -O3 ; some routines will have been compiled with a lower level of optimization when necessary.

In this implementation:

The library has been created to be used with MKL version 11.0 Update 3, and this version of MKL is supplied as a part of this product (see contents). Some older versions of MKL were also tested with the library, as documented above, and these worked OK apart from a known bug in the LAPACK routine DTGSYL in MKL version 10.3 Update 7. Users who require this routine or any of the LAPACK generalised eigensolvers are particularly encouraged to use a later version of MKL. Please see the Intel web site for further information about MKL (

2.3. Post Release Information

Please check the following URL:

for details of any new information related to the applicability or usage of this implementation.

3. Distribution Medium

The software is available to download from any of the NAG websites (see NAG Websites under Section 5). Upon request, the software may be distributed by CD or DVD as appropriate.

3.1. Contents

The following shows the directory/file organization of the implementation materials as they will be installed.
            |- doc -|- in.html  (Installer's Note, (this document))
            |       |- un.html  (Users' Note)
            |       |- libnagsmp.a  (static library requiring
            |- lib -|                vendor BLAS/LAPACK)
            |       |- (shareable library requiring
            |                        vendor BLAS/LAPACK)
fsl6i24dcl -|
            |- nag_interface_blocks -|- *
            |            |- source --|- ??????e.f90
            |            |
            |- examples -|- data ----|- ??????e.d
            |            |           |- ??????e.opt
            |            |
            |            |- results -|- ??????e.r
            |- scripts -|- nagsmp_example
            |           |- nagsmp_example_shar
            |- c_headers -|- * (C/C++ header file and information)
            |- mkl11.0 --|- * (Intel ® Math Kernel Library)
            |- rtl -|- * (Intel ifort compiler run-time libraries)
            |           |- bin -|- * (directories of binaries
            |           |             for supported platforms)
            |- license -|- README.TXT
                        |- doc -|- * (End User Guide)

The following shows the directory/file organization of the Library Manual materials as they will be installed.

nagdoc_fl24 -|- index.html
             |- examples -|- baseresults -|- ??????*.r
             |            |- source      -|- ??????*.f90
             |            |- data        -|- ??????*.d
             |                            |- ??????*.opt
             |- html  -|- FRONTMATTER -|- manconts.html  (main HTML index)
             |         |               |- *.html         (foreword & copyright)
             |         |
             |         |- [A00-X07] -|- *conts.html  (chapter contents)
             |         |             |- *intro.html  (chapter introduction)
             |         |             |- *f.html      (routine documents)
             |         |
             |         |- figures -|- *.png  (figures and plotfiles)
             |         |
             |         |- GENINT -|- *.html  (general introductory material)
             |         |
             |         |- INDEXES -|- GAMS -|- gams.html  (GAMS index)
             |         |           |        |- *.html     (GAMS files)
             |         |           |
             |         |           |- KWIC -|- kwic.html  (KWIC index)
             |         |                    |- *.html     (KWIC files)
             |         |
             |         |- styles -|- *.css  (CSS stylesheets)
             |                    |- *.js   (JavaScript)
             |- pdf   -|- FRONTMATTER -|- manconts.html (main contents page)
                       |               |- manconts.pdf  (main contents page)
                       |               |- *.pdf  (NAG foreword and copyright pages)
                       |               |- *.html (NAG foreword and copyright pages)
                       |- [A00-X07] -|- *conts.html   (chapter contents)
                       |             |- *conts.pdf    (chapter contents)
                       |             |- *intro.pdf    (chapter introduction)
                       |             |- *f.pdf        (routine documents)
                       |- GENINT -|- *.html (general introductory material)
                       |          |- *.pdf  (general introductory material)
                       |- INDEXES -|- *.pdf (bookmarked file containing links
                       |                     to KWIK/kwic.html and GAMS/gams.html)
                       |- INUNS -|- usersnote.pdf   (implementation-specific

3.2. File Sizes

The files require approximately the following disk space:
  Library software:  911 MB
  Library Manual:    269 MB

4. Installation

4.1. Installation of Library Software and Manual

If you have downloaded the Library materials from our website as a tar gzip file (fsl6i24dcl.tgz), cd to the directory where the file is located and extract the installation materials using the following commands:
  gunzip fsl6i24dcl.tgz
  tar xvf fsl6i24dcl.tar
This will extract the files, fs24.tar, lic_agr.txt, in.html and un.html.

If you have downloaded the Library Manual as a tar gzip file (mk24_doc.tgz) run the command

  gunzip mk24_doc.tgz
to extract the file mk24_doc.tar.

4.1.1. Installation Procedure

You can install the materials from the CD/DVD or download directory by executing the Bourne Shell script install in a command window as:
If you are logged in as root then by default, the materials will be installed in /opt/NAG/ or /usr/local/NAG/ depending on your system. However, you may choose a different location. In this document we refer to the directory /opt/NAG/fsl6i24dcl or /usr/local/NAG/fsl6i24dcl as [INSTALL_DIR]. This convention is also used in the Users' Note (un.html).

The directory [INSTALL_DIR]/scripts contains two scripts to show how to use the pre-compiled modules and the libraries provided with this implementation. See Users' Note, Section 3.3. Subsequent to the installation, if you move this product to some other location then these scripts must be changed to reflect that fact.

The install script can install the Library Manual in the same location as the NAG Library material or at some other location of your choice.

You may wish to move the Library Manual to the same location as that for other NAG products. You are encouraged to make it readily available to users.

4.1.2. License Management

The use of the NAG Library for SMP & Multicore is controlled by the Kusari license management system. This release of the NAG Library for SMP & Multicore uses version 2.2-58 of Kusari.

In order to enable the software, NAG will issue you with a license key. The license key is contained in a text file consisting of details of the software that will be enabled.

To request a license key, run the program khostid located in the license/bin/linux_x64/ subdirectory of the software distribution. This utility must be run from a command prompt. Return the information that it displays, together with the product code (in this case FSL6I24DCL), by e-mail (or FAX) to NAG. Alternatively, direct the output from this utility to a file and send both the file and the product code to NAG.

A short term (demonstration or trial) license key contains one or more lines like the following:

FSL6I24DC TRIAL 2011/11/12 "EMnxidA3oeoj0F1Yvi5ibxPjB7"
Specifically, it has a line containing the word TRIAL. Longer term license keys must be locked to a specific computer, i.e. they will enable the software on one computer only. These license keys include the word NODE instead of the word TRIAL above.

Once you have obtained one of the above license keys, the easiest way to install it is to store the text in a file,

The license software in this implementation automatically looks for these particular files and reads the first one found, so no other action is necessary. Alternatively, store the license in a file with a name and location of your choice, say,
The location of the license file, if it is not one of the default places listed above, must be made known to the NAG application by setting the environment variable NAG_KUSARI_FILE to the full pathname of the file before the application is invoked.

For example, in the C-shell, type:

  setenv NAG_KUSARI_FILE [INSTALL_DIR]/license.lic
or in the Bourne shell, type:

Further details about Kusari and how it may be configured to suit your local circumstances (e.g. how to install the license key on a server) are included in the Kusari License Management documentation in the license/doc/ subdirectory of the software distribution. See also the Kusari FAQ:

4.2. Release to Users

The Users' Note (doc/un.html) should be checked and amended as necessary (particularly Sections 3.1, 3.3 and 5). Advice on accessing the library (see Users' Note, Section 3.1) can be checked by running a few example programs following that advice; a suitable sample would be D01AUF, E04UCA and F07ADF. The installation can also be tested using the scripts nagsmp_example and nagsmp_example_shar. (see Users' Note, Section 3.3). The Users' Note (doc/un.html) should then be made available to users directly, or be absorbed into local access information.

The following material should also be made accessible to users:

documentation files:

The nagdoc_fl24 directory contains the Library Manual.

compiled libraries:

  Intel ® Math Kernel libraries supplied by NAG
interface block files:
example program material:
C and C++ header material:

Note that the example material has been adapted, if necessary, from that published in the Library Manual, so that programs are suitable for execution with this implementation with no further changes (but see Section 3.3 of the Users' Note for comments about possible differences in results obtained). Making the example material directly available to users provides them with easily adaptable templates for their own problems.

4.3. Further Information

4.3.1. Maintenance Level

The maintenance level of the Library can be determined by compiling and executing the example that calls A00AAF, or you could call the script nagsmp_example with the arguments a00aaf 1. See Users' Note, Section 3.3. This example prints out details of the implementation, including title and product code, compiler and precision used, mark and maintenance level.

5. Support from NAG

(a) Contact with NAG

Queries concerning this document or the implementation generally should be directed to NAG at one of the addresses given in the Appendix. Users subscribing to the support service are encouraged to contact one of the NAG Response Centres (see below).

(b) NAG Response Centres

The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.

The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.

When contacting a Response Centre, it helps us deal with your enquiry quickly if you can quote your NAG site reference or account number and NAG product code (in this case FSL6I24DCL).

(c) NAG Websites

The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at the following URLs:,, or

(d) NAG Electronic Newsletter

If you would like to be kept up to date with news from NAG then please register to receive our free electronic newsletter, which will alert you to announcements about new products or product/service enhancements, technical tips, customer stories and NAG's event diary. You can register via one of our websites, or by contacting us at

(e) Product Registration

To ensure that you receive information on updates and other relevant announcements, please register this product with us. For NAG Library products this may be accomplished by filling in the online registration form at

6. User Feedback

Many factors influence the way that NAG's products and services evolve, and your ideas are invaluable in helping us to ensure that we meet your needs. If you would like to contribute to this process, we would be delighted to receive your comments. Please contact any of the NAG Response Centres (shown below).

Appendix - Contact Addresses

Wilkinson House
Jordan Hill Road
OXFORD  OX2 8DR                         NAG Ltd Response Centre
United Kingdom                          email:

Tel: +44 (0)1865 511245                 Tel: +44 (0)1865 311744
Fax: +44 (0)1865 310139                 Fax: +44 (0)1865 310139

801 Warrenville Road
Suite 185
Lisle, IL  60532-4332                   NAG Inc Response Center
USA                                     email:

Tel: +1 630 971 2337                    Tel: +1 630 971 2337
Fax: +1 630 971 2706                    Fax: +1 630 971 2706

Nihon NAG KK
Hatchobori Frontier Building 2F
Tokyo 104-0032                          Nihon NAG Response Centre
Japan                                   email:

Tel: +81 3 5542 6311                    Tel: +81 3 5542 6311
Fax: +81 3 5542 6312                    Fax: +81 3 5542 6312

NAG Taiwan Branch Office
5F.-5, No.36, Sec.3
Minsheng E. Rd.
Taipei City 10480                       NAG Taiwan Response Centre
Taiwan                                  email:

Tel: +886 2 25093288                    Tel: +886 2 25093288
Fax: +886 2 25091798                    Fax: +886 2 25091798