F07 Chapter Contents
F07 Chapter Introduction
NAG Library Manual

# NAG Library Routine DocumentF07FWF (ZPOTRI)

Note:  before using this routine, please read the Users' Note for your implementation to check the interpretation of bold italicised terms and other implementation-dependent details.

## 1  Purpose

F07FWF (ZPOTRI) computes the inverse of a complex Hermitian positive definite matrix $A$, where $A$ has been factorized by F07FRF (ZPOTRF).

## 2  Specification

 SUBROUTINE F07FWF ( UPLO, N, A, LDA, INFO)
 INTEGER N, LDA, INFO COMPLEX (KIND=nag_wp) A(LDA,*) CHARACTER(1) UPLO
The routine may be called by its LAPACK name zpotri.

## 3  Description

F07FWF (ZPOTRI) is used to compute the inverse of a complex Hermitian positive definite matrix $A$, the routine must be preceded by a call to F07FRF (ZPOTRF), which computes the Cholesky factorization of $A$.
If ${\mathbf{UPLO}}=\text{'U'}$, $A={U}^{\mathrm{H}}U$ and ${A}^{-1}$ is computed by first inverting $U$ and then forming $\left({U}^{-1}\right){U}^{-\mathrm{H}}$.
If ${\mathbf{UPLO}}=\text{'L'}$, $A=L{L}^{\mathrm{H}}$ and ${A}^{-1}$ is computed by first inverting $L$ and then forming ${L}^{-\mathrm{H}}\left({L}^{-1}\right)$.

## 4  References

Du Croz J J and Higham N J (1992) Stability of methods for matrix inversion IMA J. Numer. Anal. 12 1–19

## 5  Parameters

1:     UPLO – CHARACTER(1)Input
On entry: specifies how $A$ has been factorized.
${\mathbf{UPLO}}=\text{'U'}$
$A={U}^{\mathrm{H}}U$, where $U$ is upper triangular.
${\mathbf{UPLO}}=\text{'L'}$
$A=L{L}^{\mathrm{H}}$, where $L$ is lower triangular.
Constraint: ${\mathbf{UPLO}}=\text{'U'}$ or $\text{'L'}$.
2:     N – INTEGERInput
On entry: $n$, the order of the matrix $A$.
Constraint: ${\mathbf{N}}\ge 0$.
3:     A(LDA,$*$) – COMPLEX (KIND=nag_wp) arrayInput/Output
Note: the second dimension of the array A must be at least $\mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{N}}\right)$.
On entry: the upper triangular matrix $U$ if ${\mathbf{UPLO}}=\text{'U'}$ or the lower triangular matrix $L$ if ${\mathbf{UPLO}}=\text{'L'}$, as returned by F07FRF (ZPOTRF).
On exit: $U$ is overwritten by the upper triangle of ${A}^{-1}$ if ${\mathbf{UPLO}}=\text{'U'}$; $L$ is overwritten by the lower triangle of ${A}^{-1}$ if ${\mathbf{UPLO}}=\text{'L'}$.
4:     LDA – INTEGERInput
On entry: the first dimension of the array A as declared in the (sub)program from which F07FWF (ZPOTRI) is called.
Constraint: ${\mathbf{LDA}}\ge \mathrm{max}\phantom{\rule{0.125em}{0ex}}\left(1,{\mathbf{N}}\right)$.
5:     INFO – INTEGEROutput
On exit: ${\mathbf{INFO}}=0$ unless the routine detects an error (see Section 6).

## 6  Error Indicators and Warnings

Errors or warnings detected by the routine:
${\mathbf{INFO}}<0$
If ${\mathbf{INFO}}=-i$, the $i$th parameter had an illegal value. An explanatory message is output, and execution of the program is terminated.
${\mathbf{INFO}}>0$
If ${\mathbf{INFO}}=i$, the $i$th diagonal element of the Cholesky factor is zero; the Cholesky factor is singular and the inverse of $A$ cannot be computed.

## 7  Accuracy

The computed inverse $X$ satisfies
 $XA-I2≤cnεκ2A and AX-I2≤cnεκ2A ,$
where $c\left(n\right)$ is a modest function of $n$, $\epsilon$ is the machine precision and ${\kappa }_{2}\left(A\right)$ is the condition number of $A$ defined by
 $κ2A=A2A-12 .$

The total number of real floating point operations is approximately $\frac{8}{3}{n}^{3}$.
The real analogue of this routine is F07FJF (DPOTRI).

## 9  Example

This example computes the inverse of the matrix $A$, where
 $A= 3.23+0.00i 1.51-1.92i 1.90+0.84i 0.42+2.50i 1.51+1.92i 3.58+0.00i -0.23+1.11i -1.18+1.37i 1.90-0.84i -0.23-1.11i 4.09+0.00i 2.33-0.14i 0.42-2.50i -1.18-1.37i 2.33+0.14i 4.29+0.00i .$
Here $A$ is Hermitian positive definite and must first be factorized by F07FRF (ZPOTRF).

### 9.1  Program Text

Program Text (f07fwfe.f90)

### 9.2  Program Data

Program Data (f07fwfe.d)

### 9.3  Program Results

Program Results (f07fwfe.r)