NAG Library Routine Document

d02udf  (bvp_ps_lin_cgl_deriv)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

d02udf differentiates a function discretized on Chebyshev Gauss–Lobatto points. The grid points on which the function values are to be provided are normally returned by a previous call to d02ucf.

2
Specification

Fortran Interface
Subroutine d02udf ( n, f, fd, ifail)
Integer, Intent (In):: n
Integer, Intent (Inout):: ifail
Real (Kind=nag_wp), Intent (In):: f(n+1)
Real (Kind=nag_wp), Intent (Out):: fd(n+1)
C Header Interface
#include nagmk26.h
void  d02udf_ ( const Integer *n, const double f[], double fd[], Integer *ifail)

3
Description

d02udf differentiates a function discretized on Chebyshev Gauss–Lobatto points on -1,1. The polynomial interpolation on Chebyshev points is equivalent to trigonometric interpolation on equally spaced points. Hence the differentiation on the Chebyshev points can be implemented by the Fast Fourier transform (FFT).
Given the function values fxi on Chebyshev Gauss–Lobatto points xi = - cos i-1 π / n , for i=1,2,,n+1, f is differentiated with respect to x by means of forward and backward FFTs on the function values fxi. d02udf returns the computed derivative values fxi, for i=1,2,,n+1. The derivatives are computed with respect to the standard Chebyshev Gauss–Lobatto points on -1,1; for derivatives of a function on a,b the returned values have to be scaled by a factor 2/b-a.

4
References

Canuto C, Hussaini M Y, Quarteroni A and Zang T A (2006) Spectral Methods: Fundamentals in Single Domains Springer
Greengard L (1991) Spectral integration and two-point boundary value problems SIAM J. Numer. Anal. 28(4) 1071–80
Trefethen L N (2000) Spectral Methods in MATLAB SIAM

5
Arguments

1:     n – IntegerInput
On entry: n, where the number of grid points is n+1.
Constraint: n>0 and n is even.
2:     fn+1 – Real (Kind=nag_wp) arrayInput
On entry: the function values fxi, for i=1,2,,n+1
3:     fdn+1 – Real (Kind=nag_wp) arrayOutput
On exit: the approximations to the derivatives of the function evaluated at the Chebyshev Gauss–Lobatto points. For functions defined on a,b, the returned derivative values (corresponding to the domain -1,1) must be multiplied by the factor 2/b-a to obtain the correct values on a,b.
4:     ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1​ or ​1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6
Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, n=value.
Constraint: n>0.
On entry, n=value.
Constraint: n is even.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

The accuracy is close to machine precision for small numbers of grid points, typically less than 100. For larger numbers of grid points, the error in differentiation grows with the number of grid points. See Greengard (1991) for more details.

8
Parallelism and Performance

d02udf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
d02udf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

The number of operations is of the order n logn  and the memory requirements are On; thus the computation remains efficient and practical for very fine discretizations (very large values of n).

10
Example

The function 2x+exp-x, defined on 0,1.5, is supplied and then differentiated on a grid.

10.1
Program Text

Program Text (d02udfe.f90)

10.2
Program Data

Program Data (d02udfe.d)

10.3
Program Results

Program Results (d02udfe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017