NAG Library Routine Document

g05rzf  (multivar_normal)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

g05rzf sets up a reference vector and generates an array of pseudorandom numbers from a multivariate Normal distribution with mean vector a and covariance matrix C.

2
Specification

Fortran Interface
Subroutine g05rzf ( mode, n, m, xmu, c, ldc, r, lr, state, x, ldx, ifail)
Integer, Intent (In):: mode, n, m, ldc, lr, ldx
Integer, Intent (Inout):: state(*), ifail
Real (Kind=nag_wp), Intent (In):: xmu(m), c(ldc,m)
Real (Kind=nag_wp), Intent (Inout):: r(lr), x(ldx,*)
C Header Interface
#include nagmk26.h
void  g05rzf_ ( const Integer *mode, const Integer *n, const Integer *m, const double xmu[], const double c[], const Integer *ldc, double r[], const Integer *lr, Integer state[], double x[], const Integer *ldx, Integer *ifail)

3
Description

When the covariance matrix is nonsingular (i.e., strictly positive definite), the distribution has probability density function
fx = C-1 2πm exp - 12 x-aT C-1 x-a  
where m is the number of dimensions, C is the covariance matrix, a is the vector of means and x is the vector of positions.
Covariance matrices are symmetric and positive semidefinite. Given such a matrix C, there exists a lower triangular matrix L such that LLT=C. L is not unique, if C is singular.
g05rzf decomposes C to find such an L. It then stores m, a and L in the reference vector r which is used to generate a vector x of independent standard Normal pseudorandom numbers. It then returns the vector a+Lx, which has the required multivariate Normal distribution.
It should be noted that this routine will work with a singular covariance matrix C, provided C is positive semidefinite, despite the fact that the above formula for the probability density function is not valid in that case. Wilkinson (1965) should be consulted if further information is required.
One of the initialization routines g05kff (for a repeatable sequence if computed sequentially) or g05kgf (for a non-repeatable sequence) must be called prior to the first call to g05rzf.

4
References

Knuth D E (1981) The Art of Computer Programming (Volume 2) (2nd Edition) Addison–Wesley
Wilkinson J H (1965) The Algebraic Eigenvalue Problem Oxford University Press, Oxford

5
Arguments

1:     mode – IntegerInput
On entry: a code for selecting the operation to be performed by the routine.
mode=0
Set up reference vector only.
mode=1 or 3
Generate variates using reference vector set up in a prior call to g05rzf.
mode=2 or 4
Set up reference vector and generate variates.
The variates are stored differently in x for mode=1 or 2 compared with mode=3 or 4.
Constraint: mode=0, 1, 2, 3 or 4.
2:     n – IntegerInput
On entry: n, the number of random variates required.
Constraint: n0.
3:     m – IntegerInput
On entry: m, the number of dimensions of the distribution.
Constraint: m>0.
4:     xmum – Real (Kind=nag_wp) arrayInput
On entry: a, the vector of means of the distribution.
5:     cldcm – Real (Kind=nag_wp) arrayInput
On entry: the covariance matrix of the distribution. Only the upper triangle need be set.
Constraint: C must be positive semidefinite to machine precision.
6:     ldc – IntegerInput
On entry: the first dimension of the array c as declared in the (sub)program from which g05rzf is called.
Constraint: ldcm.
7:     rlr – Real (Kind=nag_wp) arrayInput/Output
On entry: if mode=1 or 3, the reference vector as set up by g05rzf in a previous call with mode=0, 2 or 4.
On exit: if mode=0 or 2, the reference vector that can be used in subsequent calls to g05rzf with mode=1 or 3.
8:     lr – IntegerInput
On entry: the dimension of the array r as declared in the (sub)program from which g05rzf is called. If mode=1 or 3, it must be the same as the value of lr specified in the prior call to g05rzf with mode=0, 2 or 4.
Constraint: lrm×m+1+1.
9:     state* – Integer arrayCommunication Array
Note: the actual argument supplied must be the array state supplied to the initialization routines g05kff or g05kgf.
On entry: contains information on the selected base generator and its current state.
On exit: contains updated information on the state of the generator.
10:   xldx* – Real (Kind=nag_wp) arrayOutput
Note: the second dimension of the array x must be at least m if mode=1 or 2 and at least n if mode=3 or 4.
On exit: the array of pseudorandom multivariate Normal vectors generated by the routine.
Two possible storage orders are available. If mode=1 or 2 then xij holds the jth dimension for the ith variate. If mode=3 or 4 this ordering is reversed and xji holds the jth dimension for the ith variate.
11:   ldx – IntegerInput
On entry: the first dimension of the array x as declared in the (sub)program from which g05rzf is called.
Constraints:
  • if mode=1 or 2, ldxn;
  • if mode=3 or 4, ldxm.
12:   ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1​ or ​1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6
Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, invalid value for mode.
Constraint: mode=0, 1, 2, 3 or 4.
ifail=2
On entry, n=value.
Constraint: n0.
ifail=3
On entry, m=value.
Constraint: m > 0.
ifail=5
On entry, the covariance matrix C is not positive semidefinite to machine precision.
ifail=6
On entry, ldc=value and m=value.
Constraint: ldcm.
ifail=7
m is not the same as when r was set up in a previous call.
Previous value of m=value and m=value.
ifail=8
On entry, lr is not large enough, lr=value: minimum length required =value.
ifail=9
On entry, state vector has been corrupted or not initialized.
ifail=11
On entry, ldx=value and m=value.
Constraint: ldxm.
On entry, ldx=value and n=value.
Constraint: ldxn.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

Not applicable.

8
Parallelism and Performance

g05rzf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
g05rzf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

The time taken by g05rzf is of order nm3.
It is recommended that the diagonal elements of C should not differ too widely in order of magnitude. This may be achieved by scaling the variables if necessary. The actual matrix decomposed is C+E=LLT, where E is a diagonal matrix with small positive diagonal elements. This ensures that, even when C is singular, or nearly singular, the Cholesky factor L corresponds to a positive definite covariance matrix that agrees with C within machine precision.

10
Example

This example prints ten pseudorandom observations from a multivariate Normal distribution with means vector
1.0 2.0 -3.0 0.0  
and covariance matrix
1.69 0.39 -1.86 0.07 0.39 98.01 -7.07 -0.71 -1.86 -7.07 11.56 0.03 0.07 -0.71 0.03 0.01 ,  
generated by g05rzf. All ten observations are generated by a single call to g05rzf with mode=2. The random number generator is initialized by g05kff.

10.1
Program Text

Program Text (g05rzfe.f90)

10.2
Program Data

Program Data (g05rzfe.d)

10.3
Program Results

Program Results (g05rzfe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017