S30CAF (PDF version)
S Chapter Contents
S Chapter Introduction
NAG Library Manual

NAG Library Routine Document

S30CAF

Note:  before using this routine, please read the Users' Note for your implementation to check the interpretation of bold italicised terms and other implementation-dependent details.

+ Contents

    1  Purpose
    7  Accuracy

1  Purpose

S30CAF computes the price of a binary or digital cash-or-nothing option.

2  Specification

SUBROUTINE S30CAF ( CALPUT, M, N, X, S, K, T, SIGMA, R, Q, P, LDP, IFAIL)
INTEGER  M, N, LDP, IFAIL
REAL (KIND=nag_wp)  X(M), S, K, T(N), SIGMA, R, Q, P(LDP,N)
CHARACTER(1)  CALPUT

3  Description

S30CAF computes the price of a binary or digital cash-or-nothing option which pays a fixed amount, K, at expiration if the option is in-the-money (see Section 2.4 in the S Chapter Introduction). For a strike price, X, underlying asset price, S, and time to expiry, T, the payoff is therefore K, if S>X for a call or S<X for a put. Nothing is paid out when this condition is not met.
The price of a call with volatility, σ, risk-free interest rate, r, and annualised dividend yield, q, is
Pcall = K e-rT Φd2
and for a put,
Pput = K e-rT Φ-d2
where Φ is the cumulative Normal distribution function,
Φx = 1 2π - x -y2/2 dy ,
and
d2 = ln S/X + r-q - σ2 / 2 T σT .

4  References

Reiner E and Rubinstein M (1991) Unscrambling the binary code Risk 4

5  Parameters

1:     CALPUT – CHARACTER(1)Input
On entry: determines whether the option is a call or a put.
CALPUT='C'
A call. The holder has a right to buy.
CALPUT='P'
A put. The holder has a right to sell.
Constraint: CALPUT='C' or 'P'.
2:     M – INTEGERInput
On entry: the number of strike prices to be used.
Constraint: M1.
3:     N – INTEGERInput
On entry: the number of times to expiry to be used.
Constraint: N1.
4:     X(M) – REAL (KIND=nag_wp) arrayInput
On entry: Xi must contain Xi, the ith strike price, for i=1,2,,M.
Constraint: Xiz ​ and ​ Xi 1 / z , where z = X02AMF , the safe range parameter, for i=1,2,,M.
5:     S – REAL (KIND=nag_wp)Input
On entry: S, the price of the underlying asset.
Constraint: Sz ​ and ​S1.0/z, where z=X02AMF, the safe range parameter.
6:     K – REAL (KIND=nag_wp)Input
On entry: the amount, K, to be paid at expiration if the option is in-the-money, i.e., if S>Xi when CALPUT='C', or if S<Xi when CALPUT='P', for i=1,2,,m.
Constraint: K0.0.
7:     T(N) – REAL (KIND=nag_wp) arrayInput
On entry: Ti must contain Ti, the ith time, in years, to expiry, for i=1,2,,N.
Constraint: Tiz, where z = X02AMF , the safe range parameter, for i=1,2,,N.
8:     SIGMA – REAL (KIND=nag_wp)Input
On entry: σ, the volatility of the underlying asset. Note that a rate of 15% should be entered as 0.15.
Constraint: SIGMA>0.0.
9:     R – REAL (KIND=nag_wp)Input
On entry: r, the annual risk-free interest rate, continuously compounded. Note that a rate of 5% should be entered as 0.05.
Constraint: R0.0.
10:   Q – REAL (KIND=nag_wp)Input
On entry: q, the annual continuous yield rate. Note that a rate of 8% should be entered as 0.08.
Constraint: Q0.0.
11:   P(LDP,N) – REAL (KIND=nag_wp) arrayOutput
On exit: the leading M×N part of the array P contains the computed option prices.
12:   LDP – INTEGERInput
On entry: the first dimension of the array P as declared in the (sub)program from which S30CAF is called.
Constraint: LDPM.
13:   IFAIL – INTEGERInput/Output
On entry: IFAIL must be set to 0, -1​ or ​1. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this parameter, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of IFAIL on exit.
On exit: IFAIL=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6  Error Indicators and Warnings

If on entry IFAIL=0 or -1, explanatory error messages are output on the current error message unit (as defined by X04AAF).
Errors or warnings detected by the routine:
IFAIL=1
On entry, CALPUT'C' or 'P'.
IFAIL=2
On entry, M0.
IFAIL=3
On entry, N0.
IFAIL=4
On entry, Xi<z or Xi>1/z, where z=X02AMF, the safe range parameter.
IFAIL=5
On entry, S<z or S>1.0/z, where z=X02AMF, the safe range parameter.
IFAIL=6
On entry, K<0.0.
IFAIL=7
On entry, Ti<z, where z=X02AMF, the safe range parameter.
IFAIL=8
On entry, SIGMA0.0.
IFAIL=9
On entry, R<0.0.
IFAIL=10
On entry, Q<0.0.
IFAIL=12
On entry, LDP<M.

7  Accuracy

The accuracy of the output is dependent on the accuracy of the cumulative Normal distribution function, Φ. This is evaluated using a rational Chebyshev expansion, chosen so that the maximum relative error in the expansion is of the order of the machine precision (see S15ABF and S15ADF). An accuracy close to machine precision can generally be expected.

8  Further Comments

None.

9  Example

This example computes the price of a cash-or-nothing put with a time to expiry of 0.75 years, a stock price of 100 and a strike price of 80. The risk-free interest rate is 6% per year and the volatility is 35% per year. If the option is in-the-money at expiration, i.e., if S>X, the payoff is 10.

9.1  Program Text

Program Text (s30cafe.f90)

9.2  Program Data

Program Data (s30cafe.d)

9.3  Program Results

Program Results (s30cafe.r)


S30CAF (PDF version)
S Chapter Contents
S Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2012